1. [[Friday Night FOSS Aug’23]]
2. [[Self-Hosting 101]]

2024-06-13T17:24:58Z

Vivek:

==Department of Computer Science And Engineering==
Department of Computer Science and Engineering offers Undergraduate and Postgraduate programs in Computer Science and Engineering, Master of Computer Applications program, and a Doctoral degree program.

==History==
BTech programme in Computer Science and Engineering started in 1985 under the Department of Electrical Engineering. The Department of Computer Science and Engineering was formed in June 1997. The three-year MCA programme started in 1988. The two-year MTech programme in Computer Science and Engineering started in 1998. The two-year MTech programme in Computer Science and Engineering (Information Security) started in 2006. PhD programme started in 2002.

==Areas Of Research==
===Algorithms and Complexity===
Graph Algorithms, Complexity of Security Models and Verification, String Algorithms.
===Bioinformatics===
Algorithms for Sequence Alignment, Data and Text Mining for Bioinformatics.
===Cloud Computing===
Cloud Security, Cloud Databases, BigData Analysis
===Compilers and Programming languages===
Program Analysis and Transformation.
===Computer Architecture===
Simulators for High Performance Machines, Power Efficient Caches.
===Database Management Systems===
===Distributed Computing===
Middleware, Adaptation in Event based Middleware, P2P Overlays, Self Organizing Overlays.
===Image Processing===
Data Compression, Image Compression, Medical Imaging.
===Information Security===
Cryptographic Algorithms, Authentication Protocols, Electronic Voting, Malware Protection, Integrity Protocols, DoS Protection, Computer Forensics, Processor based Security, Security Management.
===Networks===
Routing Protocols, Congestion Control, Security Protocols, Intrusion Detection Systems, Firewalls, Mobile Protocols, Ad Hoc Networks, Network Management.
===Operating Systems===
File Systems for Flash Memory, Hardware assisted VMM.
===Software Engineering===
Empirical Software Engineering, Software Testing, Software Reuse.

==VISION==
To be a Centre of Excellence in the Discipline of Computing.

==MISSION==
To develop human resource with sound knowledge- theory and practical - in the discipline of computing and the ability to apply the knowledge to the benefit of the society at large.

==Labs==
* [[Cloud Computing Lab]]
* [[Big Data & Biocomputing Laboratory]]
* [[Image Processing & Multimedia Laboratory]]
* [[Machine Learning Laboratory]]
* [[Secure Computing Laboratory]]
* [[Hardware & Embedded Systems Laboratory]]
* [[NSL]]
* [[SSL]]

===M N Neelakantan Memorial Lecture Series===
Department of Computer Science and Engineering conducts a biannual Lecture series in memory of the first head of our Department - Prof. M N Neelakantan. Prof. Neelakantan was Professor of Electrical Engineering, founder of the Computer Science and Engineering Department and Dean at Regional Engineering College, Calicut. He was a constant source of inspiration for our department to excel, be it in fields of academics or research.
[[M N Neelakantan Memorial Lecture Series]]

Department of computer science and engineering

2024-06-13T17:22:50Z

Vivek:

NSL

2024-06-13T17:21:51Z

Vivek:

This lab was established in 2006. The objective of this laboratory is to provide the infrastructure for conducting the regular labs (Data Structures Lab, DBMS Lab, Compiler Lab, and Programming Lab) and project works for the BTech and MCA Programs. The lab is equipped with state of the art servers, desktops and software (Linux and Compilers for C, C++, Schema, TCL, PHP, Java etc).

===Lab Resources===

Andromeda (Server)

Server 2( Andromeda Backup Server)

Dell PowerEdge 2950 Series Server
CPU - Intel(R) Xeon CPU E5430@2.66GHz
CPU Cores - 4
RAM - 8 GB
HDD - 292.3GB(Present)
OS - Ubuntu 14.04(LTS)
RAID - 2+1

Server 3

Dell PoerEdge 2950 Series Server
CPU - Intel Xeon CPU E5430@2.66GHz
CPU Cores - 4
RAM - 8 GB
HDD - 438.5GB(Present)
OS - Ubuntu 12.04(LTS)

Workstation 1

FUJITSU CELSIUS M740 XEON E5-2630 v3 2.40 GHz 20MB turbo boost
CPU - Intel C612, board D3348
RAM - 4 GB, DDR4 * 4
HDD - 1000GB
OS - Centos
Graphics Card - NVIDIA Quadro K620 2GB
NIC CARD - 1*1 GB
PCI SLOT - 2* PCIE GEN3 16 PCIE gen34

Workstations(3 Nos.)

Dell Precision T3610
CPU - Intel Xeon CPU E5-1620 V2@3.70 GHz
RAM - 8 GB
HDD - 1TB
OS - Ubuntu 14.04(LTS) & CentOs
Graphics Card - NVIDIA Quadro K200 (2GB)

Desktop(75 nos.)

Processor - Dell Optiplex 7010
CPU - Intel Core TM i5 - 3470 CPU@3.20 GHz
RAM - 4GB
OS - Ubuntu 12.04(LTS)

Staff Computer

HP PRODESK 600 G2

Processor - i5 - 6500
RAM - 8GB
HDD - 1TB
OS - DOS

LENEVO AIO Think Centre M73z

Processor: Intel(R) core TM i3
RAM - 4GB DDR3
HDD - 500 GB SATA
Graphic - Integrated Intel HD Graphics 4400

Hardware & Embedded Systems Laboratory

2024-06-13T17:20:24Z

Vivek: Created page with "===Hardware & Embedded Systems Laboratory=== This lab was established in 2006. The objective of this laboratory is to provide the infrastructure for conducting the regular labs (Hardware Lab) and project works for the BTech and MCA Programs. The laboratory is equipped with 28 desktops, 45 trainer kits, 5 ARM processors, 3 ic testers and 10 no of regulated dc power supply. ===1. DELL OPTIPLEX DESKTOP COMPUTER=== DELL Optiplex 7010 core i5 Desktop- 1 is in the 27 Numb..."

===Hardware & Embedded Systems Laboratory===

This lab was established in 2006. The objective of this laboratory is to provide the infrastructure for conducting the regular labs (Hardware Lab) and project works for the BTech and MCA Programs. The laboratory is equipped with 28 desktops, 45 trainer kits, 5 ARM processors, 3 ic testers and 10 no of regulated dc power supply.

===1. DELL OPTIPLEX DESKTOP COMPUTER===

DELL Optiplex 7010 core i5 Desktop- 1 is in the 27 Numbers are in the h/w lab.

DELL Optiplex 7010 MT Desktop intel core i7- 1 is in the cabin.

The ip address ranges from 192.168.42.121 to 192.168.42.149.

===2. ARM CORTEX M4 EMBEDDED DEVELOPMENT KIT ( 5 Nos, )===

The ARM® Cortex®-M4 processor is ARM’s high performance embedded processor developed to address digital signal control markets that demand an efficient, easy-to-use blend of control and signal processing capabilities.

The combination of high-efficiency signal processing functionality with the low-power, low cost and ease-of-use benefits of the Cortex-M family of processors is designed to satisfy the emerging category of flexible solutions specifically targeting the motor control, automotive, power management, embedded audio and industrial automation market.

===ABOUT SAM4S-EK2===

SAM4S Evaluation Kit

The SAM4S Evaluation kit (SAM4S-EK2) enables evaluation capabilities and code development of applicatipns running on a SAM4SD32 device.

Deliverables: The Atmel SAM4S-EK2 toolkit contains the following items:

Board:

-> a SAM4S-EK2 board

-> a universal input AC/DC power supply with US, Europe and UK plug adapters

Cables:

-> one USB cable

-> one serial RS232 cable

===Board Overview===

The SAM4S-EK board is based on the integration of an ARM Cortex-M3 processor with on-board NAND Flash and a set of popular peripherals. It is designed to provide a high performance processor evaluation solution with high flexibility for various kinds of applications.

===Feature List===

Here is the list of the main board components and interfaces

Atmel SAM4SD32C chip in LQFP100 package with optional socket footprint
12 MHz crystal
32.768 KHz crystal
Optional SMB connector for external system clock input
NAND Flash
2.8 inch TFT color LCD display with touch panel and backlight
UART port with level shifter circuit
USART port with level shifter circuit multiplexed with RS485 port with level shifter circuit
Microphone input and mono/stereo headphone jack output
SD/MMC interface
Reset button: NRST
User buttons: Left and Right
Atmel QTouch® buttons: Up, Down, Left, Right, Valid and Slider
Full-speed USB device port
JTAG/ICE port
On-board power regulation
BNC connector for ADC input
BNC connector for DAC output
User potentiometer connected to the ADC input
ZigBee® connector

===SOFTWARE INSTALLATION STEPS===

Open Atmal studio 6.2 setup -> Click Run to install atmel studio 6.2 software package -> Click install to proceed installation -> Click next -> Accept license agreement and click next -> Ensure you are having minimum 1.5GB space in your harddisk to install this software before install -> Then click Finish to complete visual studio installation -> Install USB driver in your cd then Click AtmelUSBInstaller icon to install USB driver -> Accept license agreement and click install -> Now your installation finished.

===SAM-BA INSTALLATION STEPS===

Run the Sam-ba set up icon -> Click Run to start installation -> Click Next to continue -> Then click -> I Agree icon to accept license agreement -> Click next to continue -> Browse and choose your destination folder to installation -> Click install to proceed installation.

===3. IC TESTERS===

An Integrated Circuit tester (IC tester) is used to test Integrated Circuits (ICs). IC Testers can test logic gates, Flip Flops and Shift Registers to enable you to take a wise decision as if it is a good IC or something has gone wrong.

a) ANALOG AND DIGITAL IC TESTER (MME-ADIT 40)

MME-ADIT 40 is the latest MICROPROCESSOR based IC Tester from MINMAX ELECTRONICS. It functionally tests a wide variety of digital ICs up to 40 pins and Linear/Analog ICs up to 20 pins.

SPECIFICATIONS:

Display: 16x2 Backlit Alphanumeric LCD

Keyboard: 24 keys Membrane Keyboard

Package: Digital ICs 14, 16, 20, 24, 28 & 40 Pin DIP and Analog/Linear ICs 6, 8, 14, 16 & 20 Pin DIP

Method : Output test with simulated inputs and at nominal load Truth table comparison

b) DIGITAL IC TESTER

Features

can test more than 1500+ ICs
Tests wide range of Digital IC's such as 74 Series, 40/45 Series
24 pin DIP ZIF sockets.
Auto Search facility for listed IC's.
16 keys and 16 x 1 line LCD display.

c)LINEAR IC TESTER

Features

Can test more than 600+ ICs
Tests a wide range of Analog IC's such as Op-amps, Timers, Transistor Arrays, Analog switches, Opto-couplers, ADC, DAC, Voltage Regulator, etc
40 pin DIP ZIF socket.
50 cherry keys Key pad and 16 X 2 LCD Display.

===4. REGULATED DC POWER SUPPLY(MODEL LQ6324) ( 10 Nos.)===

A regulated power supply is an embedded circuit; it converts unregulated AC into a constant DC. With the help of a rectifier it converts AC supply into DC. Its function is to supply a stable voltage (or less often current), to a circuit or device that must be operated within certain power supply limits. The output from the regulated power supply may be alternating or unidirectional, but is nearly always DC.

===Overview And Features:===

Laboratory bench unit.
Fully protected against overload and short circuit.
Three independent outputs electrically isolated from each other.
5V/5A with over voltage crowbar protection for digital ICs.
Electrically floating outputs.
Compact modular construction.
Precise regulation, low ripple and noise for both constant
voltage and constant current operation.
Quality components and conservating ratings for high reliability and long life.
Optional features with extra cost.

===5. 3MHZ FUNCTION GENERATOR ( 10 Nos. )===

A function generator is usually a piece of electronic test equipment or software used to generate different types of electrical waveforms over a wide range of frequencies. Some of the most common waveforms produced by the function generator are the sine, square, triangular and sawtooth shapes.

Features

0.003Hz to 3MHz frequency range.
Very high waveform quality at all frequency & levels.
2mV to 20V pk-pk from 50 ohm or 600 ohm .
Auxillary TTL/CMOS output.
Variable symmetric with constant frequency.
variable DC offset with zero detent.
1000:1 frequency change by vernier or sweep voltage.

===6. LAN-T TRAINER ( 1 Nos.)===

The LAN-T Benchmark trainer is useful for study and development of reliable data transfer protocols, networking layers and applications. The Trainer exposes users to networking concepts at the physical, MAC network and transport layers, through a series of designed experiments. The experiments reinforce the theory covered in lectures, while the ‘hands-on’ programming exercises train students to industry level. The trainer can also be used for project work involving many layers of the network hierarchy.

Features

Comprehensive set of experiments to observe and measure the behaviour of several LAN protocols: MAC layer, Data link layers and connection management.
User configurable data rates - 8kbps, 16, 32, 64, 128, 256, 512 and 1Mbps.
Generation of bit errors and Frame errors between nodes -up to 10-6.
Variable Network size - up to six nodes with each NEU. NEUs can be cascaded to increase the network size.
Emulation of two nodes by each PC. Halves the numberof PCs required.

===7. LASER PRINTER ( 1 No.)===

A laser printer is a popular type of personal computer printer that uses a non-impact (keys don't strike the paper), photocopier technology. When a document is sent to the printer, a laser beam "draws" the document on a selenium-coated drum using electrical charges. After the drum is charged, it is rolled in toner, a dry powder type of ink. The toner adheres to the charged image on the drum. The toner is transferred onto a piece of paper and fused to the paper with heat and pressure. After the document is printed, the electrical charge is removed from the drum and the excess toner is collected. Most laser printers print only in monochrome. A color laser printer is up to 10 times more expensive than a monochrome laser printer.

===8. OSCILLOSCOPE ( 10 Nos.)===

An oscilloscope is a laboratory instrument commonly used to display and analyze the waveform of electronic signals. In effect, the device draws a graph of the instantaneous signal voltage as a function of time.

A typical oscilloscope can display alternating current (AC) or pulsating direct current (DC) waveforms having a frequency as low as approximately 1 hertz (HZ) or as high as several megahertz (MHZ). High-end oscilloscopes can display signals having frequencies up to several hundred gigahertz (GHZ). The display is broken up into so-called horizontal divisions (hor div) and vertical divisions (vert div). Time is displayed from left to right on the horizontal scale. Instantaneous voltage appears on the vertical scale, with positive values going upward and negative values going downward.

===9. DIGITAL IC TRAINER KITS ( 45 Nos.)===

Features

Completely self-contained stand alone unit.
Built in IC based DC regulated power supply.
Test points provided on panel at various stages in the circuit.
Set of required number of Patch cords
Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Experiments

To Study the Operation of Digital Logic ICs TTL and CMOS.
To Study the AND,OR, NOT, NAND , NOR, XOR Gates, Flip-Flops, Counters etc.
To Study the Flip-Flops.
To Study the Counters.
To Study the Shift Register.
To Study the Multiplexer and De-Multiplexer.
To Study the Encoder and Decoder.
To Study the ALU.

Specifications

7 segment LED display (2 nos.)
Logic input switches (10 nos.)
Logic status indicators (10 nos.)
Bounce less Pulsar 1 Hz to 100 KHz TTL clocks.
Bread Board - 2 Nos.
Power LED Indication.
Built in Regulated Power Supply: 5V/1A ,12V/1A DC
AC Input : 230V AC, 50 Hz, ± 10%.Mounted on a Sophisticated Cabinet.

===Location: ===
ITL 301, IT Laboratory Complex

Secure Computing Laboratory

2024-06-13T17:17:03Z

Vivek: Created page with " This lab was established in 2005. The objective of this laboratory is to provide the infrastructure for research in various aspects of security in computing. The research scholars are the main users of this lab. The lab is equipped with state of the art machines and software. ===Location:=== ITL 303, IT Laboratory Complex"

This lab was established in 2005. The objective of this laboratory is to provide the infrastructure for research in various aspects of security in computing. The research scholars are the main users of this lab. The lab is equipped with state of the art machines and software.

===Location:===
ITL 303, IT Laboratory Complex